Transitional airplanes
Could building a single-seat ultralight lower your cost of recreational flying while you train for a pilot certificate? Compare the costs, the aircraft and the paperwork before buying a project.
Where the savings can come from
A single-seat project can make sense if you want to own it and fly it for fun even if you never change its configuration. Price the flying you want to do beyond your certificate training. Under current rules, hours flown in a Part 103 ultralight do not satisfy the flight-time requirements for a new sport or private airplane certificate. The old ultralight credit provision expired in 2012. Read § 61.52.
For example, suppose a rental costs $150 per hour with fuel, your own vehicle costs $40 per flying hour including fuel and maintenance reserves, and storage, insurance and other fixed costs total $2,200 per year. At those illustrative rates, 20 hours of recreational flying covers the annual fixed costs. Purchase price, tooling, financing, resale and your build time still matter. Budget the required lessons separately in both cases.
From the first lesson to the checkride
- Start with a certificated flight instructor (CFI). Seek dual instruction in a two-seat airplane with handling and landing gear similar to your intended ultralight. Use demonstrated proficiency to decide when to progress.
- Choose a kit or unfinished project. Before paying, check the actual equipment, weight, build history and the work left to do. If eventual experimental amateur-built certification matters, discuss that specific project with the FAA or a designated airworthiness representative (DAR) now.
- Prepare for the single-seat transition. An instructor cannot ride along in a Part 103 vehicle. Arrange transition training and, for a newly completed machine, an independent inspection and a qualified test pilot. Prepare for single-seat ultralight flying.
- Fly recreationally under Part 103. Keep a personal journal of flights, conditions and skills to revisit. For a powered ultralight the limits include one occupant, sport or recreation only, no airworthiness certificate, empty weight under 254 lb with specified exclusions, at most five U.S. gallons capacity, at most 55 knots calibrated at full power in level flight and at most 24 knots calibrated power-off stall speed. Part 103 vehicle and operating rules.
- Return to the trainer and earn the certificate. Have your CFI evaluate what carried over, then complete the required instruction, authorized solo, cross-country experience, endorsements and tests. Sport airplane normally requires at least 20 hours including 15 dual and five solo. The usual Part 61 private single-engine airplane path requires 40 including 20 dual and ten solo. Your instructor can map the remaining requirements before you book a checkride. Sport requirements · Private requirements.
What the “51% rule” counts
The FAA asks who fabricated and assembled the aircraft for education or recreation. Amateur builders collectively must earn more than half the applicable fabrication and assembly credit. The FAA checklist allocates task credit among the manufacturer, commercial assistance and amateur builders. Hours, money spent and percentage of parts purchased are poor substitutes for that calculation.
For example, if the seller fabricated the wing ribs and you assemble the wing, document each person's work separately. A previous amateur's documented work can contribute. A factory-built wing goes in the manufacturer's column. Spending a winter repairing, repainting or maintaining a finished airplane does not turn its original factory work into amateur work. Ask for dated build photos, logs, receipts and records of professional assistance before buying. FAA checklist briefing guide.
Recommended transitional planes
These are single-seat designs to investigate. VNE is the published never-exceed speed in miles per hour. Cruise speed and the Part 103 full-power level-flight limit answer different questions. Check the manual and placards for the individual build.
| Model | VNE (mph) | What to check on a project |
|---|---|---|
| Aerolite 103 | 70 | U-FLY-IT lists the same redline for its Part 103 and experimental configurations. Ask who built the airframe and check the installed tank capacity. |
| Hummel UltraCruiser | 95 | Hummel lists 63 mph cruise. Canopy, engine and gear choices matter to empty weight. Ask whether the project started as plans, a kit or a factory assembly. |
| Ison Air-Bike 103 | 80 | Jordan Lake Aero lists 55 mph cruise for the single-seat 103. Confirm the variant, engine and build records. The LS and tandem models have separate specifications. |
| Kolb FireFly | 80 | Folding wings may make trailer storage practical. Check the completed weight and how much work the factory performed on a quick-build kit. |
If you later want a faster airplane
Registration gives the airplane its identity. Flying it as experimental amateur-built (E-AB) also requires a special airworthiness certificate, acceptable builder evidence, an inspection and aircraft-specific operating limitations. Previous Part 103 flights and a new pilot certificate do not establish eligibility. Confirm that your pilot privileges cover the finished airplane.
Price a manufacturer-supported configuration against buying an airplane already designed for your desired cruise. An N-number does not increase VNE. Before a performance change, review engineering support, weight and balance, the aircraft's operating limitations and any required FAA coordination or return to Phase I flight testing. Once the vehicle exceeds Part 103 limits, keep it grounded until authorized to fly in its new configuration. FAA amateur-built certification · FAA flight-testing handbook.